T.E.(Terry) Manning
Schoener 50
1771 ED Wieringerwerf
The Netherlands
Tel/fax 0031-227-604128
Homepage: http://www.flowman.nl
E-mail:pumps@flowman.nl
FLOWMAN
ADVANCED PUMP TECHNOLOGIES
Edition 05 : 01 January, 2004
DIAPHRAGM HAND PUMPS
HANDYMAN 40 PUMPS
SPECIFICATIONS AND PERFORMANCE
Light weight approx. 3kg (6lbs)
Die-pressed aisi 304 stainless steel body
Coupling sizes: 30mm (1 1/4").
Coupling materials : standard nylon; optional stainless steel pipe coupling
Capacity : 1 liters (1/4 gallon) per stroke, up to 40 liters (10 gallons) per minute.
Diaphragms and valves : either neoprene (for general use) or perbunan (for fuels)
Expected diaphragm and valve life : 300 working hours
Suction lift to 3 meters (9 feet) discharge to 3 meters (9 feet)
Size of passage : 25mm (1") maximum size of solids.
CUSTOMS TARIFF : 84 13 30 90
VERSIONS AVAILABLE
The Handyman 40 diaphragm hand pump is available in the following versions:
-Standard version
-Nautical version with stainless steel handle
-Version for drums (barrels)
CHARACTERISTICS OF USE
For all liquids for which neoprene and perbunan rubbers are suitable, including by way of example, water; salt water; brine; dirty water; water with large solids in suspension (including whole olives and small fishes); dense liquids; cess pits; alimentary liquids including wine; fuel oils.
Typical areas of application : Emergency services generally; boats including life-boats; motor vehicle, tractor and air-craft refueling; home wine and beer; gardening and horticulture; and liquid transfer generally.
LIMITATIONS OF USE AND DISCLAIMER
Handyman 40 pumps are NOT suitable for liquids potentially dangerous to human beings, animals, or things. More specifically, they are NOT SUITABLE for use with any acids.
Users are NOT protected against damage to eyes and skin in case of splitting of the diaphragms, and suitable protective clothing and goggles must always be worn.
No liability whether direct or consequential will attach to the vendor or his principals, agents, or representatives for damage whether direct or indirect to persons, animals, or things howsoever caused by failure of the user adequately to take protective measures in case of breakage at any time of any part of the Handyman 40 pump.
LIMITED WARRANTY
Handyman 40 pumps are guaranteed against defective materials and workmanship for 12 months from the date of purchase by the end user with a maximum of 18 months from the date of our invoice. This warranty shall cover defective materials and workmanship only and shall not be deemed to extend to the costs of labour or transport or any other costs whether direct or indirect. Where this limited warranty is in conflict with the laws of the place where the final sale to the end user took place, then the minimum legally prescribed warranty shall prevail.
ORDERING
When ordering, please specificy :
Whether diaphragms and flapper valves are to be neoprene or perbunan
Whether couplings are to be nylon or stainless steel pipe couplings
FOR MORE INFORMATION ON THE HANDYMAN 40 PUMPS PLEASE GO TO:
DRAWING, PARTS LISTS AND MATERIALS
RETURN TO:
If you cannot find the information you require on these pages, please contact Terry Manning
by e-mail on : pumps@flowman.nl or
telephone or fax him at 0031-227-604128.
E-mail Terry Manning