T.E.(Terry) Manning Schoener 50 1771 ED Wieringerwerf The Netherlands Tel/fax 0031-227-604128 Homepage: http://www.flowman.nl E-mail:pumps@flowman.nl

FLOWMAN

ADVANCED PUMP TECHNOLOGIES

Edition 04 : 01 January, 2002

Description of the Fluidmover centrifugal horizontal axis impeller pumps

A range of medium pressure low volume horizontal axis impeller pumps made from die-pressed stainless steel aisi 304 or aisi 316 with capacities up to 15m3 per hour and heads up to 60m sold either as wet end alone; pump and motor; or pump and motor with trolley mount.

The Fluidmover pumps feature :

*Manufacture to ISO 90002 norms
*Entirely die-pressed from heavy duty 4mm thick sheet metal aisi 304 or aisi 316
*High resistance to corrosion
*Smooth internal surfaces
*Impellers from stainless steel aisi 316
*Light weight and limited dimensions
*Monoblock coupling
*Reduced maintenance
*Motors enclosed externally ventilated with IP55 protection suitable for continuous duty.
*ADPE (explosion proof) motors available.
*Mechanical rotative type seals with buna (NBR), viton(R), or teflon(R) rings
*Temperature up to 100 degrees centigrade
*Maximum system pressure 7 bar.

Applications

Fluidmover pumps are for use with clean liquids including acids and solvents compatible with the type of stainless steel and seal used, in industrial systems wherever liquids tend to get dirty, abrasive, slightly aggressive, and in particular in industries such by way of example as the dyeing, washing, printing, galvanics industries and with inflammable liquids subject to the use of ADPE explosion proof motors.

Do NOT use Fluidmover pumps for:

Liquids which are incompatible with the materials used, amongst which in particular and BY WAY OF EXAMPLE, chloric acid, hydrochloric acid in any concentration, silver chloride, hydrofluoric acid, muriatic acid, sulphuric acid, hydrobromic acid, molten antimony and aluminium, ammonia, sulphur chloride.

SPECIFICATIONS

Capacity

All readings are with water at 15 degrees centigrade, specific weight 1000 F/m3 and atmospheric pressure equal to 750mm Hg and are accurate to +/- 5%

Fluidmover pumps with 4 pole 1400 rpm motors

Fluidmover1 0.3HP (1 PHASE) 0.5HP (3 PHASE) 1400 RPM INLET AND OUTLET 1" MALE GAS THREADED SINGLE OR THREE PHASE

Head in meters	4	6	10	12	00
Liters/minute	040	020	012	007	000

Fluidmover2 0.75HP 1400 RPM INLET/OUTLET 1 1/4" MALE GAS THREAD SINGLE PHASE

Head in meters	5	10	15	20	00
Liters/minute	070	050	040	012	000

Fluidmover3 2.5HP 1400 RPM INLET/OUTLET 1 1/2" MALE GAS THREAD THREE PHASE ONLY

Head in meters	5	10	15	20	22	00
Liters/minute	120	100	080	025	010	000

Fluidmover pumps with 2 pole 2800 rpm motors

Fluidmover1 0.5HP 2800 RPM INLET AND OUTLET 1" gas male thread SINGLE PHASE

Head in meters	5	10	15	18	20
Liters/minute	075	060	050	035	030

Fluidmover1 0.75HP 2800 RPM INLET AND OUTLET 1" gas male thread THREE PHASE

Head in meters	5	10	15	20	25	30
Liters/minute	080	065	055	050	030	020

Fluidmover2 1.5HP INLET/OUTLET 1 1/4" gas male thread SINGLE PHASE

Head in meters	5	10	15	20	25
Liters/minute	100	080	070	060	050

Fluidmover2 2HP INLET/OUTLET 1 1/4" gas male thread THREE PHASE

Head in meters	5	10	15	20	25	30
Liters/minute	160	150	130	120	100	085

Fluidmover2 2.5HP INLET/OUTLET 1 1/4" gas male thread THREE PHASE

Head in meters	5	10	15	20	25	30	35	40
Liters/minute	160	150	130	120	100	085	075	065

Fluidmover3 4.5HP 2800 RPM INLET/OUTLET 1 1/2" male gas thread THREE PHASE

Head in meters	5	10	15	20	25	30	35
Liters/minute	250	220	200	190	170	160	150

Fluidmover3 6HP 2800 RPM INLET/OUTLET 1 1/2" male gas thread THREE PHASE

Head in meters	5	10	15	20	25	30	35	40	45	50	55	60
Liters/minute	250	220	200	190	170	160	150	130	120	100	050	035

Motor specifications

Motors are NOT standard because of the special flange required to make the close coupling with the pump.
They are enclosed externally ventilated type with protection IP55 for continuous duty.
Explosion-proof three phase motors are available for all pump sizes. Special voltages and/or tropicalisation of motors are available on request, subject to the payment of an extra price.

Acoustic pressure (noise) in decibels

Fluidmover1

The noise level at maximum head is less than 70 dBA

Fluidmover2

The noise level at head 10m is 70.3 dBA
The noise level at 30m head is 71.3 dBA
The noise level at maximum head is 80.6 dBA

Fluidmover3

The noise level at head 15m is 78.9 dBA
The noise level at 35m head is 79.5 dBA
The noise level at maximum head is 74.5 dBA

Seals

OPERATING LIMITS

Pressure : 6 bar
Fluid speed: 12 meters/second
Temperature : -30 degrees C to 90 degrees C

SEAL PARTS AND MATERIALS

Part 01	Rotating part-seal support	steel
Part 02	Rotating part-spring	steel
Part 03	Rotating part-stop ring	steel
Part 04	Rotating part-seal	with buna or viton(R) or teflon(R) rings
Part 05	Rotating part-external casing	steel
Part 06	Rotating part-contact ring	graphite
Part 07	Fixed part-counterface	ceramic
Part 08	Fixed part-seal	with buna, viton(R) or teflon(R) rings

SEAL DIMENSIONS Codes

d1	Shaft diameter
d3	External diameter of seal
i3	Height of rotating part of seal
d4	Seal chamber diameter
d7	Diameter of fixed part of seal
i4	Height of fixed part of seal
d6	Diameter of shaft passage
i1	Total height of seal

Model	d1	d3	i3	d4	d7	i4	d6	i1
Fluidmover1 with buna/viton(R) rings	18	40	14	38	40	10	21	23
Fluidmover1 with teflon(R) rings	20	42	28	42	21	09	21	37
Fluidmover2 with buna/viton(R) rings	25	48	14	45	48	10	27	35
Fluidmover2 with teflon(R) rings	25	50	28	38	50	09	27	40
Fluidmover3 with buna/viton(R) rings	25	48	14	45	48	10	27	35
Fluidmover3 with teflon(R) rings	25	50	28	38	50	09	27	40

FOR MORE INFORMATION ON THE FLUIDMOVER PUMPS PLEASE GO TO

PHOTOGRAPH AND DRAWING WITH PARTS/MATERIALS

PRICES AND SALES CONDITIONS

MAINTENANCE

RETURN TO:

PRODUCTS OFFERED

If you cannot find the information you require on these pages, please contact Terry Manning by e-mail on : pumps@flowman.nl or telephone or fax him at 0031-227-604128.

E-mail Terry Manning