| Part | Description | Milky Whey 200 | Milky Whey 300 | Milky Whey 500 | Milky Whey 1000 |
|---|---|---|---|---|---|
| 01 | Manual lock nuts | M10 knobs | M12 knobs | M12 knobs | n.a. |
| 02 | Clamp bar | 130 pcd | 165 pcd | n.a. | n.a. |
| 03 | Pump body | 119-25/25 | 145-40/25 | 195-50/40 | 218-65/65 |
| 04 | Impeller screw | M 5x30 | M8 | M10 | M10 |
| 05 | Screw o-ring | BS.007 | BS.011 | BS.012 | BS.012 |
| 06 | Tie rod | M8/105/M10 | M10/115/M12 | M10/80/M12 | n.a. |
| 07/08 | Seal | BT-025 | BT-032 | BT-040 | BT-040 |
| 09 | Seal spacer | n.a. | n.a. | 58/41/3 | n.a. |
| 10 | Body seal ring | BS.345 | BS.355 | BS.339 | BS.372 |
| 11 | Backplate | 130 pcd | 165 pcd | 215 pcd | 215 pcd |
| 11A | Backplate/shroud | Diameters are larger to house the motor shroud | |||
| 12 | (Motor) | ||||
| 13 | (Carter/shroud) | ||||
| 14 | (Motor tripod) | ||||
| 15 | (Shroud screws) | ||||
| 16 | (Motor nuts) | ||||
| 17 | (Motor washers) | ||||
| 18 | (Rear shroud nut) | ||||
| 19 | (Rear shroud blind nut) | ||||
| 20 | (Motor screws) | ||||
| 21 | Mounting screws | M8x25ss | M10x25ss | M10x30ss | n.a. |
| 22 | Shaft key | 4mm | 40/8/5 | 8mm | 8mm |
| 23 | Mounting nuts | M8 | M10 | M10 | M10 |
| 24 | Mounting washers | M8 | M10 | M10 | M10 |
| 25 | Clamp bolt | n.a. | n.a. | M10x35 cap | M8 special |
| 26 | Clamp ring | n.a. | n.a. | 215 pcd | 290 edge clamp |
| 27 | Spacing collar | n.a. | n.a. | n.a. | 40.5/29/9 |