T.E.(Terry) Manning
Schoener 50
1771 ED Wieringerwerf
The Netherlands
Tel/fax 0031-227-604128
Homepage: http://www.flowman.nl
E-mail:pumps@flowman.nl

FLOWMAN

ADVANCED PUMP TECHNOLOGIES

Edition 05 : 01 January, 2002

Prices for the Milky Whey sanitary pumps

All prices are ex-warehouse Netherlands and exclude VAT and all other taxes.
Prices are expressed in US$.

MILKY WHEY 200

Milky Whey 200 single phase 1400rpm 0.25KW pump and motorUS$0426
Milky Whey 200 single phase 1400rpm 0.25KW pump and motor with shroud & tripodUS$0553
Milky Whey 200 single phase 1400rpm 0.25KW pump and motor shroud and trolleyUS$0663
Milky Whey 200 single phase 2800rpm 0.75KW pump and motorUS$0426
Milky Whey 200 single phase 2800rpm 0.75KW pump and motor with shroud & tripodUS$0553
Milky Whey 200 single phase 2800rpm 0.75KW pump and motor shroud and trolleyUS$0663
Milky Whey 200 three phase 1400rpm 0.25KW pump and motorUS$0426
Milky Whey 200 three phase 1400rpm 0.25KW pump and motor with shroud & tripodUS$0553
Milky Whey 200 three phase 1400rpm 0.25KW pump and motor shroud and trolleyUS$0663
Milky Whey 200 three phase 2800rpm 0.75KW pump and motorUS$0426
Milky Whey three phase 2800rpm 0.75KW pump and motor with shroud & tripodUS$0553
Milky Whey three phase 2800rpm 0.75KW pump and motor shroud and trolleyUS$0663
Milky Whey 200 extra price for RJT fittingsUS$0046
Milky Whey 200 extra price for SMS fittingsUS$0046
Milky Whey 200 pump group (wet end only)US$0378
Milky Whey 200 motor cover (shroud) with tripodUS$0129
Milky Whey 200 trolley aisi 304 separateUS$0110
Milky Whey 200 seal set inox/alumina/edpm BT25US$0037
Milky Whey 200 tripodUS$0060
Milky Whey 200 base plateUS$0021

PartDescriptionMilky Whey 200
01Manual lock nutsUS$003
02Clamp barUS$016
03Pump body gasUS$192
03Pump body DINUS$192
03Pump body RJTUS$237
03Pump body SMSUS$237
04Impeller screwUS$002,50
05Impeller screw ringUS$002,50
06Impeller for 2800 rpmUS$100
06Impeller for 1400 rpmUS$100
07Tie rodUS$006
08/09SealUS$037
08Rotating part of sealUS$025
09Fixed part of sealUS$012
09Seal spacerUS$002
10Body seal ringUS$010
11Backplate no coverUS$105
11ABackplate coverUS$105
12(Motor) 1400 1 phase 0.35US$192
12(Motor) 2800 1 phase 1.00US$192
12(Motor) 1400 3 phase 0.35US$192
12(Motor) 2800 3 phase 1.00US$160
13(Carter/shroud)US$111
14(Motor tripod)US$060
15(Shroud screws)US$003
16(Motor nuts)US$001
17(Motor washers)US$001
18(Rear shroud nut)US$002
19(Shroud blind nut)US$002
20(Motor screws)US$001,50
21Mounting screwsUS$001,50
22Shaft keyUS$004
23Mounting nutsUS$002
24Mounting washersUS$001
28Spacing rings 50.5/14/1US$001
28Spacing rings 50.5/14.1.5US$001

MILKY WHEY 300

Milky Whey 300 single phase 1400rpm 1.10KW pump and motorUS$ 0517
Milky Whey 300 single phase 1400rpm 1.10KW pump and motor with shroud & tripodUS$ 0650
Milky Whey 300 single phase 1400rpm 1.10KW pump and motor shroud and trolleyUS$ 1016
Milky Whey 300 single phase 2800rpm 2.20KW pump and motorUS$ 0517
Milky Whey 300 single phase 2800rpm 2.20KW pump and motor with shroud & tripodUS$ 0650
Milky Whey 300 single phase 2800rpm 2.20KW pump and motor shroud and trolleyUS$ 1016
Milky Whey 300 three phase 1400rpm 1.10KW pump and motorUS$ 0517
Milky Whey 300 three phase 1400rpm 1.1KW pump and motor with shroud & tripodUS$ 0650
Milky Whey 300 three phase 1400rpm 1.1KW pump and motor shroud and trolleyUS$ 1016
Milky Whey 300 three phase 2800rpm 2.20KW pump and motorUS$ 0517
Milky Whey 300 three phase 2800rpm 2.2KW pump and motor with shroud & tripodUS$ 0650
Milky Whey 300 three phase 2800rpm 2.20KW pump and motor shroud and trolleyUS$ 1016
Milky Whey 300 extra price for RJT fittingsUS$ 0055
Milky Whey 300 extra price for SMS fittingsUS$ 0055
Milky Whey 300 pump group (wet end only)US$ 0444
Milky Whey 300 motor cover (shroud) with tripodUS$ 0137
Milky Whey 300 trolley aisi 304 separateUS$ 0119
Milky Whey 300 seal set inox/alumina/edpm BT25UD$ 0059
Milky Whey 300 tripodUS$ 0065
Milky Whey 300 base plateUS$ 0021

PartDescriptionMilky Whey 300
01Manual lock nutsUS$ 003
02Clamp barUS$ 021
03Pump body gasUS$ 236
03Pump body DINUS$ 236
03Pump body RJTUS$ 290
03Pump body SMSUS$ 290
04Impeller screwUS$ 002
05Impeller screw ringUS$ 002
06Impeller for 2800 rpmUS$ 128
06Impeller for 1400 rpmUS$ 128
07Tie rod M10/80/M12US$ 006
08/09SealUS$ 059
08Rotating part of sealUS$ 035
09Fixed part of sealUS$ 025
09Seal spacerUS$ 025
10Body seal ringUS$ 015
11Backplate no coverUS$ 135
11ABackplate coverUS$ 135
12(Motor) 1400 1 phase 0.35US$ 270
12(Motor) 2800 1 phase 1.00US$ 270
12(Motor) 1400 3 phase 0.35US$ 270
12(Motor) 2800 3 phase 1.00US$ 270
13(Carter/shroud)US$ 137
14(Motor tripod)US$ 055
15(Shroud screws)US$ 003
16(Motor nuts)US$ 001
17(Motor washers)US$ 001
18(Rear shroud nut)US$ 002
19(Shroud blind nut)US$ 002
20(Motor screws)US$ 001
21Mounting screwsUS$ 001
22Shaft keyUS$ 004
23Mounting nutsUS$ 004
24Mounting washersUS$ 001
28Spacing rings 50.5/14/1US$ 001
28Spacing rings 50.5/14.1.5US$ 001

MILKY WHEY 500

Milky Whey 500 three phase 1400rpm 2.20KW pump and motorUS$ 0669
Milky Whey 500 three phase 1400rpm 1.20KW pump and motor with shroud & tripodUS$ 0833
Milky Whey 500 three phase 1400rpm 2.20KW pump and motor shroud and trolleyUS$ 0970
Milky Whey 500 three phase 2800rpm 4.00KW pump and motorUS$ 0669
Milky Whey 500 three phase 2800rpm 4.00KW pump and motor with shroud & tripodUS$ 0833
Milky Whey 500 three phase 2800rpm 4.00KW pump and motor shroud and trolleyUS$ 0970
Milky Whey 500 extra price for RJT fittingsUS$ 0068
Milky Whey 500 extra price for SMS fittingsUS$ 0068
Milky Whey 500 extra price for WIDIA sealsUS$ 0018
Milky Whey 500 extra price for VITON sealsUS$ 0028
Milky Whey 500 pump group (wet end only)US$ 0547
Milky Whey 500 motor cover (shroud) with tripodUS$ 0164
Milky Whey 500 trolley aisi 304 separateUS$ 0137
Milky Whey 500 seal set inox/alumina/edpm BT25US$ 0074
Milky Whey 500 tripodUS$ 0077
Milky Whey 500 base plateUS$ 0025

PartDescriptionMilky Whey 500
01Manual lock nutsUS$ 003
03Pump body gasUS$ 202
03Pump body DINUS$ 486
03Pump body RJTUS$ 610
03Pump body SMSUS$ 610
04Impeller screwUS$ 005
05Impeller screw ringUS$ 002
06Impeller for 2800 rpmUS$ 347
06Impeller for 1400 rpmUS$ 347
07Tie rod M10/80/M12US$ 074
08/09Seal aluminaUS$074
08/09Seal widiaUS$ 042
08/09Seal vitonUS$ 102
08Rotating part of alumina sealUS$ 043
09Fixed part of alumina sealUS$ 031
09ASeal spacerUS$ 002
10Body seal ringUS$ 019
11Backplate no coverUS$ 172
11ABackplate coverUS$ 173
12(Motor) 1400 3 phase 2.20US$ 389
12(Motor) 2800 3 phase 4.00US$ 389
13(Carter/shroud)US$ 164
14(Motor tripod)US$ 169
15(Shroud screws)US$ 003
16(Motor nuts)US$ 001
17(Motor washers)US$ 001
18(Rear shroud nut)US$ 002
19(Shroud blind nut)US$ 006
20(Motor screws)US$ 002
21Mounting screwsUS$ 002
22Shaft keyUS$004
23Mounting nutsUS$ 003
24Mounting washersUS$ 001
28Spacing rings 50.5/14/1US$ 001
28Spacing rings 50.5/14.1.5US$ 001

MILKY WHEY 1000

Milky Whey 1000 three phase 1400rpm 2.20KW pump and motorUS$ 0920
Milky Whey 1000 three phase 1400rpm 1.20KW pump and motor with shroud & tripodUS$ 1069
Milky Whey 1000 three phase 1400rpm 2.20KW pump and motor shroud and trolleyUS$ 1458
Milky Whey 1000 three phase 2800rpm 4.00KW pump and motorUS$ 1036
Milky Whey 1000 three phase 2800rpm 4.00KW pump and motor with shroud & tripodUS$ 1190
Milky Whey 1000 three phase 2800rpm 4.00KW pump and motor shroud and trolleyUS$ 1559
Milky Whey 1000 extra price for RJT fittingsUS$ 0091
Milky Whey 1000 extra price for SMS fittingsUS$ 0091
Milky Whey 1000 extra price for WIDIA sealsUS$ 0018
Milky Whey 1000 extra price for VITON sealsUS$ 0028
Milky Whey 1000 pump group (wet end only)US$ 00866
Milky Whey 1000 motor cover (shroud) with tripodUS$ 0182
Milky Whey 1000 trolley aisi 304 separateUS$ 0160
Milky Whey 1000 seal set inox/alumina/edpm BT25US$ 074
Milky Whey 1000 tripodUS$ 0090
Milky Whey 1000 base plateUS$ 0057

PartDescriptionMilky Whey 1000
03Pump body gasUS$ 361
03Pump body DINUS$ 361
03Pump body RJTUS$ 452
03Pump body SMSUS$ 452
04Impeller screwUS$ 004
05Impeller screw ringUS$ 004
06Impeller for 2800 rpmUS$ 183
06Impeller for 1400 rpmUS$ 183
08/09Seal aluminaUS$ 074
08/09Seal widiaUS$ 092
08/09Seal vitonUS$ 102
08Rotating part of alumina sealUS$ 043
09Fixed part of alumina sealUS$ 031
10Body seal ringUS$ 025
11Backplate no coverUS$ 205
11ABackplate coverUS$ 205
12(Motor) 1400 3 phase 2.20US$ 239
12(Motor) 2800 3 phase 4.00US$ 239
13(Carter/shroud)US$ 183
14(Motor tripod)US$ 090
15(Shroud screws)US$ 004
16(Motor nuts)US$ 002
17(Motor washers)US$ 001
18(Rear shroud nut)US$ 002
19(Shroud blind nut)US$ 003
22Shaft keyUS$ 005
23Mounting nutsUS$ 003
24Mounting washersUS$ 002
25Manual clamp screwUS$ 010
26Lock ring inoxUS$ 032
27Spacers inoxUS$ 001
28Spacing rings 40.5/28/1US$ 001
28Spacing rings 50.5/28.1US$ 001

Weights and volumes

Milky Whey 200

Milky Whey 200 pump and motor only net weight 10kg.
Packed in cartons 44cm x 25cm x 33cm gross weight 12kg
Number of pieces per cubic meter 27

Milky Whey 200 pump and motor with motor cover and tripod, net weight 12kg
Packed in cartons 44cm x 25cm x 33cm gross weight 14kg
Number of pieces per cubic meter 27

Milky Whey 200 pump and motor with motor cover and trolley, net weight 16kg
Packed in cartons 75cm x 41cm 65cm gross weight 22kg
Number of pieces per cubic meter 5.

Milky Whey 300

Milky Whey 300 pump and motor only net weight 18kg
Packed in cartons 50cm x 32cm x 38cm gross weight 20kg
Number of pieces per cubic meter 16.

Milky Whey 300 pump and motor with motor cover and tripod, net weight 21
Packed in cartons 50cm x 32cm x 38cm gross weight 23kg
Number of pieces per cubic meter 16.

Milky Whey 300 pump and motor with motor cover and trolley, net weight 27kg
Packed in cartons 75cm x 41cm x 65cm gross weight 32kg
Number pf pieces per cubic meter 5.

Milky Whey 500

Milky Whey 500 pump and motor only net weight 30kg
Packed in cartons 60.7cm x 35cm x 39cm gross weight 33kg
Number of pieces per cubic meter 12.

Milky Whey 500 pump and motor with motor cover and tripod, net weight 34kg
Packed in cartons 60.7cm x 35cm x 39cm gross weight 37kg
Number of pieces per cubic meter 12.

Milky Whey 500 pump and motor with motor cover and trolley, net weight 39kg
Packed in cartons 75cm x 41cm x 65cm gross weight 45kg

Milky Whey 1000

Milky Whey 1000 pump and motor only net weight 42kg
Packed in cartons 60.7 x 35 x 39cm gross weight 44kg
Number of pieces per cubic meter 12.

Milky Whey 1000 pump and motor with motor cover and tripod, net weight 45kg
Packed in wooden crates 65cm x 38cm x 43cm gross weight 52kg
Number of pieces per cubic meter 9.

Milky Whey 1000 pump and motor with motor cover and trolley net weight 54kg
Packed in wooden crates 75cm x 41cm x 65cm, gross weight 60kg.

Lead time

Allow 21 working days for despatch of goods. Allow more for RJT and SMS or special executions.

WARNING!! European factories are closed throughout August and the Christmas/New Year period.

Forwarding agent

Please be sure to nominate your carrier and, where applicable, your customs agent, and detail your routing instructions.

Insurance and passage of liability

Liability passes to the buyer at the moment of loading on board truck at the warehouse in the Netherlands.
Please advise whether insurance is to be arranged.

Packing

Packing in reinforced cardboard cartons suitable for short distance and air-transport is INCLUDED in the price of the pumps.

Discount structures

001-010 units: net
011-025 units: 5%
026-050 units: 10%
051-100 units: 15%
101-500 units: 17,5%
Over 500 units:20%

Payment

Payments must be adequately covered by way of irrevocable letter of credit issued by a leading bank or made in advance. Within the European Union, payments against documents will be accepted for orders up to a value of US$10.000.

FOR MORE INFORMATION ON THE MILKY WHEY PUMPS PLEASE GO TO

GENERAL INFORMATION

PHOTOGRAPH AND DRAWING

MAINTENANCE


RETURN TO:

PRODUCTS OFFERED

If you cannot find the information you require on these pages, please contact Terry Manning
by e-mail on : pumps@flowman.nl or
telephone or fax him at 0031-227-604128.

E-mail Terry Manning